OEM Cordless Jump Rope Wireless Skipping Rope Portable Body Building Equipment

• Weight Set: :

Press “ RESET/ON ” to start, an initial value will show 50 Kgs ( or 130 Lbs ), press “ SET ” and the W (weight) column will start to flicker. Now press “ UP ” or “ DOWN ” for adjustment until your weight is indicated, then press “ SET ” to complete input. The T (time) column will begin flickering at this time. Proceed to Workout Alarm Set.

* Weight value must be entered before use. Maximum 110 Kgs ( or 250 Lbs ) / Minimum 20 Kgs ( or 40 Lbs )

• Workout Alarm Set: :

Complete Step 1, the T (time) column should be flickering now. Press “ UP ” or “ DOWN ” for adjustment until your desired time is indicated, then press “ SET ” to complete input. You should see the time set. A “ BEEP ” will sound when time is up, and all counting ( L-Lap, T-Time, C-Calorie ) will stop automatically.

* Alarm Set : Maximum 60 minutes / Minimum 1 minute

* If time set is not required, then press “ SET ” after Step 1.

To Use Your Multifunction Jumping Rope :

The counter will start automatically when you begin jumping. The loop counter will begin counting too and shows "6" on the LCD after 6 jumps in a row to avoid meaning less actions before exercise.

2 ~ 3 seconds after stopping the jumping, the calorie consumption value will be displayed. To start over, press “ RESET/ON ”, and you weight and workout alarm must be input again.

This jumping rope will shut down automatically if not activated within 8 minutes. To resume use, press “ RESET/ON ” once and it will function properly.

Battery Replacement: :

Using a screwdriver to open battery lid on the back side of handle. Remove dead battery and replace with new CR-2032 × 1 cell.

Tips for skipping rope

The swing range of the rope should be small

When skipping rope, the standard posture of our upper body should be to draw in the abdomen, lift the chest, and hold the upper arms tightly on both sides of the body. All we need to use to throw the rope is our forearms and wrists, and only need to shake slightly. Therefore, when jumping rope, the entire arm should never be swinging greatly. Large swings will not only waste our energy, but also affect our skipping speed.

The heels need to be off the ground

In fact, the reason why our knees hurt after jumping rope is very simple. When we land, our heels hit the ground first. This will cause our feet to be unable to cushion and absorb shock when we land, and the impact force will go directly to the knees. The way to avoid this is to land toes first. When we first started skipping rope, we all raised our heels very high to prevent our feet from touching the rope because we were not proficient. Therefore, we must learn not to deliberately bend our knees and lift our feet during rope skipping. It is recommended that everyone learn to use toes to jump. The advantage of this is that the range of movement is small, and it can also avoid large vibrations that may cause knee pain.

1. Our factory

This is our mechanical equipment and warehouse.

To ensure the stability and quality of our supply, our monthly production can reach 50000 and we need to ensure that it passes product testing and verification.

2. OEM &ODM

After more than 20 years of development, our company has accumulated numerous customers and continues to cooperate friendly. These include some well-known brands, such as Decathlon, TESCO, Kappa, etc.

Our company adheres to the business philosophy of "win-win" and "details determine success or failure", which becomes the cornerstone of our continuous optimization and progress.

3. Testing report

4. Rowgee skipping rope production line 

Efficient: able to complete the production of a large number of skipping ropes in a short time to ensure delivery.

Automated: Improve production efficiency and quality.

Standardized: Skipping rope production lines usually follow strict production standards and processes to ensure that every skipping rope meets quality requirements.

Precision: Able to precisely control the size, weight and other parameters of the jump rope.

Processed: The work flow on the production line is usually clearly divided and streamlined, and the production process from raw materials to final products is orderly.

Sustainable: The production line may also consider environmental factors and adopt sustainable production methods to reduce the impact on the environment.

Optimized: The production line may be continuously optimized to improve production efficiency and reduce costs while ensuring product quality.

OEM & ODM

OEM and ODM services in the skipping rope industry can meet customers' customized needs, it can promote product innovation and reduce production costs. Also , it will improve production efficiency, and reduce risks in the development and production process, which is crucial for enterprise development and market competition.

R&D

Our company has always had an R&D department since its establishment, and always advocates the spirit of excellence comes from details. We also pay attention to market trends and customer feedback to improve and innovate products. Our R&D team works closely with other departments (such as marketing, manufacturing, etc.) to ensure the successful development and launch of products.

Quality Promise:

Our company attaches great importance to and commitment to product quality, and the products undergo strict quality control processes.

Purchase Of Raw Materials:

Our company has a strict raw material procurement process, including supplier evaluation, raw material quality inspection, etc. We only use high-quality raw materials that meet quality standards.

Production Process Control:

Our company has strict production process control measures, including the maintenance of production equipment, the management of production processes, and the training of production personnel. The company strictly implements quality standards and processes during the production process.

Product Inspection And Testing:

The company conducts strict inspection and testing of products in each link to ensure that product quality meets standards and customer requirements.

Processing Of Defective Products:

The company has a complete defective product handling process, including the identification, classification, disposal and improvement measures of defective products. The company has a zero-tolerance attitude towards defective products and a commitment to continuous quality improvement.

Customer Satisfaction Guarantee:

The company attaches great importance to customer satisfaction, including promptly responding to customer feedback and handling customer complaints. The company is willing to establish long-term cooperative relationships with customers and jointly promote the continuous improvement of product quality.

Our service

Thank you for visiting our website.

Please note that our support team work Monday to Friday and it can take up to 1-3 business days for a response as our enquiries are responded to in chronological order.

To ensure we can solve your enquiry quickly, please check that you have provided the following information:

1. Product model number or pictures

2. Purchase quantity

3. Is there a freight forwarder/ship to the port

4. Your contact information
5. Any other requirements

If you have already provided the information above, we will be in touch with you soon.

1. Can you do customized products and package ?

    Yes, we provide OEM service, no matter the products or package

     This is the product packaging we provide.

2.  How about payment ?
   T/T 30% deposit, the balance before shipping; LC at sight; Western Union

3.  How about sample and shipping charge ?
      

1~2pcs stock sampls will be free, shipping charge by your side. Sample in stock in 3days, custom 

sample 5-7days.

4. How about the quality guarantee period and after-sales service?

 365 days after selling, we will 100% take the responsibility of the quality except the human damage.

5. What’s the quality control standard?

We are committed to strictly implement the international quality control standards , as the commodity inspection specifications to ensure high-quality products

Our in-house quality control standard is AQL: 1.5, 4.0

6. How about the delivery?

On time delivery is our basic principle, the delivery date on the contract will be 100% respected.